What to Do When Your Check Engine Light Is Flashing

- PublishedNov 18, 2026
- Sources3
- 3 min read

A flashing check engine light while the engine is running calls for prompt action. Pull over when safe, read your manual and call for roadside help if symptoms persist.
Decide First
If your check engine light keeps flashing while the engine is running, ease off the accelerator and get to a safe place to stop. Check the instructions for your exact vehicle. If it continues flashing, the car shakes or loses power, or another urgent warning appears, arrange roadside assistance before continuing. A flashing malfunction indicator can signal an active misfire, which can damage the catalytic converter. U.S. EPA check engine light guidance Honda 2020 Civic Sedan dashboard guide
| What you see | Immediate decision |
|---|---|
| What you seeCheck engine icon flashes repeatedly while the engine runs | Immediate decisionReduce load, pull over when safe and follow the owner’s manual. Call for roadside assistance if flashing persists or the car runs poorly. |
| What you seeCheck engine icon stays on and the car feels normal | Immediate decisionCheck the manual and make a timely diagnostic appointment. Reassess promptly if symptoms or another warning appear. |
| What you seeLight appears briefly during normal startup and goes out | Immediate decisionCheck the manual if you are unsure whether it matches the vehicle’s normal instrument self-check. |
| What you seeLow oil pressure, high temperature or a separate stop warning |
Comments are shopper discussion, not verified article evidence.
Comments are not open on AutoUnite yet. Published articles and Ask AutoUnite are the current way to get answers.
AutoUnite content is educational and research-focused. Vehicle information, pricing, ownership costs, maintenance, recalls, and other details may vary by region, dealer, and time.
| Immediate decisionFollow the exact emergency instructions for that warning. Treat it as its own problem. |
Match the symbol and message to your manual as soon as you can do so safely. An amber check engine icon, an oil pressure warning and a maintenance reminder can call for different actions even when they appear near the same gauge. The Ford and Honda instructions illustrate how manufacturer directions can differ, especially after a stop. Ford owner’s manual warning lamp guidance Honda 2020 Civic Sedan dashboard guide
A misfire is a failure of combustion to occur as expected. Severe misfiring can raise exhaust temperatures and damage the catalytic converter. Sometimes the warning first appears on a hill or when the driver accelerates. If you notice that pattern, tell the shop. Ease off and get to a safe place when you can. A warning that stops when you lift off is still worth reporting. U.S. EPA check engine light guidance
For example, if the light flashes while you are climbing an on-ramp and the car begins to shake, prioritize a safe pull-off. Once parked, call for guidance and describe the shaking and any power loss. Ask whether a tow is appropriate based on your manual and the symptoms. If you are in a traffic lane or cannot get to a safe location, prioritize roadside safety over inspecting the vehicle.
Write down how long the light flashed, your speed or driving conditions while it happened, whether the engine was cold or warm and what the car did when you eased off. If it is safe while parked, note the exact dashboard message and other active lights. Tell the shop whether the issue followed a recent repair or refill and whether symptoms recur at idle, on a hill or during acceleration.
A diagnostic code gives the technician a place to start. A misfire code can direct an investigation, but diagnosing the cause may require more evidence about ignition, fuel, air or mechanical condition. Ask for the recorded codes, the findings that support the recommended repair and how the shop will check the result. Save the evidence before clearing codes or disconnecting the battery. U.S. EPA check engine light guidance AutoUnite guide to warning lights that go out
Call for help if the flashing continues, the engine runs roughly or you feel a loss of power. Even among manufacturers, the next instruction can vary. The 2020 Civic Sedan guide tells drivers who see a blinking indicator to park safely away from flammable objects, stop the engine and let it cool before following the manual’s next steps. Ford’s cited manual calls for immediate service and avoiding hard acceleration and deceleration. Use the guidance for your vehicle and the advice of roadside assistance at the scene. Honda 2020 Civic Sedan dashboard guide Ford owner’s manual warning lamp guidance
On cars with a fuel cap, a loose cap is one possible reason for a steady emissions warning. Treat a flashing light or a rough-running engine as an urgent symptom and follow the vehicle’s instructions. Record whether the problem appeared shortly after filling up, and share that detail when you call the shop. U.S. EPA check engine light guidance